Double Glazing Seal Repairs
If double glazing window seals are broken, it can lead to damp and mould. This can cause damage to the frame and surrounding walls, and it can also affect your health.
Resealing is a cost-effective method to fix most uPVC window frames than replacing them. A glazier is usually able to clean the window frame and glass and then apply a new layer of sealant, then smooth it.
Water Leaks
Window seals are designed to keep moisture from your home. As they wear out, water can leak around your windows. A window that is leaking is not only a nuisance but can cause significant damage to the surrounding structure of your home. Solihull window repairs is crucial to spot the issue early and get it repaired by an expert before it gets any worse.
The cause of windows that leak can often be found not in the glass but on the frame or sill. A leak in this region is the most common indication of a failing window seal. It could be due to damage to the window seal as a result of weather or aging, worn out caulking or an obstruction to drainage that results in a build-up of water or ice.
Another sign of a window seal failing is water appearing in between the panes of double-glazed windows. This is not as dangerous as a leak of water since the water doesn't travel as far to get into your home. However, it does mean that the inert gasses that are encased between your panes have escaped out. This can reduce the insulation value of your window.
Condensation in between the panes is another common indication of a damaged seal. This may be caused by an ineffective window seal or it could be due to the humid climate of your home or an issue with the glass. The condensation may not only be unpleasant, but it could also cause the growth of mould and mildew in your home which is very difficult and expensive to remove.
It's time to inspect your double-glazed windows when you observe these indications. Repairs or replacements can aid in preventing your home from water leaks, lower the cost of energy, and also keep out draughts. It's a small cost to pay for the security and comfort of your family. Contact Thompson Creek Window to discuss your options regarding window seal repair or replacement. Our experienced professionals are happy to assist! We serve homeowners throughout the Mid-Atlantic region.
Condensation
A broken double-glazing seal may allow water to enter the insulating space. This water can cause condensation within the window panes and may cause fogging or misting.
If you see condensation forming within your home, it's the perfect time to contact an experienced double glazing repair service. The condensation is a sign that the seal created by the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by a variety of reasons, but it is most commonly a result of gaskets that are not properly fitted or sealants, or insulation in the uPVC frame of the windows. There are many options for repairing double glazing seals, but it's important that the new seals are correctly size to ensure an ideal seal and a snug fit.
Typically, the gaskets that are used to seal the gaps between your double-glazed units are constructed from a material such as polyurethane foam. They are designed to last for a long time, but they can deteriorate over time because of wear and wear or exposure to fluctuating temperatures and weather conditions.
Over time the foam will shrink or crack and this creates a gap in the seal, which allows moisture to enter the double-glazed windows. This can result in condensation and decrease in energy efficiency.
One solution to the issue is to seal the windows. But, this isn't 100% guaranteed to fix the issue because it could only remove the condensation that has formed and does not address the underlying issues that are causing your double-glazed windows ' to leak or to form condensation.
Another solution is to have your windows replaced completely and this should be handled by a professional who provides an insurance backed guarantee. This means that in the event that the company fails or is shut down, you will remain covered by the insurance. It's important to note that replacement windows must have a warranty of at least 10 years.
Misting
As autumn draws nearer it's a good idea check that your double glazing seals are in good working order. Window seals that are damaged can affect the insulation properties of your windows as well as cause dampness, mold and condensation. It is crucial to fix any issues with your double-glazed windows as soon as you can to prevent further damage and save on energy bills.
A typical double-glazed window is constructed from two glass panes connected by an internal space filled with gas. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is crucial to maintaining the air-tight seal which keeps cold and warm air separate in your home, saving you the cost of heating. Unfortunately, over time these seals can be damaged due to aging or weather conditions, or even inadequate installation. When this happens the magic formula for insulation that makes your double glazed windows so effective could begin to degrade.
If the seals are damaged or defective and are not repaired, they can lead to condensation and dampness which can affect your health as well as the appearance of your window. The presence of mould and damp not only causes damage to your floors, walls and ceilings, but they also create allergens and irritants within your home that could be harmful to you and your family's health.
The most common problem with double glazing is misting that occurs between the panes. This occurs when moisture gets inside the insulated section of your windows. It can be difficult to repair without professional double glazing repair.
DIY solutions to this issue are available, however we recommend against them because they can be messy and damage your windows. These methods involve drilling holes into the glass units and applying chemicals to eliminate the fog and condensation. This could lead to various problems including exposing your windows to water damage which can ruin the unit altogether.
Professional glaziers possess the knowledge and tools required to safely reseal your uPVC frames and give you lasting results. Additionally they can also give guidance on the best methods to keep your windows in good condition to prevent any future problems.
Draughts
A draught from your window is an indication that the sealant has probably been damaged and must be replaced or repaired. This will prevent cold air getting into your home, improve energy efficiency and lower heating costs and increase comfort levels and temperature control.
It is important to remember that some draughts are not caused by the window seals but rather from the gap between the bricks' frames. In certain cases, it could be possible to correct this by caulking the gap. If this is not working, it will need to be resealed professionally.
If the sealant around a double-glazed window starts to break down it allows water infiltration and can lead to damp or even mold in a few instances. This can then have a negative impact on health and can be very damaging to your property. It is important to address any water leaks immediately you spot them. If your windows are still covered by a guarantee, it is worth contacting the company that you purchased windows from, as they may pay for the repairs.
The windows themselves are typically covered by a guarantee that can be at least 10 years however some businesses offer lifetime warranties - so it's worth looking into this information. If your double glazing is covered by a warranty, you should consider contact the company you bought the windows from as soon as possible and providing them with details of any issues you are experiencing. It is recommended to do this in person or via letters and emails, to ensure all information is documented and clear.
It is also worth noting that draughts can often be caused by damaged hinges, rather than an ineffective seal. The hinges are responsible for closing the window sash (the section that you open) but they can become stiff over time if they are not regularly oiled. This can leave a gap between the frame and the sash, which can let cold air in. This issue can be resolved by replacing the hinges without affecting window seals.